Here’s the file if you want to cut your own CF Flybar.

Thanks goes to Matt of Ballistic Technology for allowing me to post the file, as he is the original creator of the flybar.

Special thanks goes to the following rcgroups.com crew:

jasonjetski

villiage_idiot

Roto Rob

rick.benjamin

Here’s the file: Flybar standard.zip

It is in dxf format which can be ported to g-code or you can print the file out and use it as a template and cut it by hand.

CAUTION MUST BE USED IF YOU CUT CARBON FIBER!!!  MAKE SURE YOU DO NOT INHALE THE DUST